VACS:Projects:Hardware:LPS:Box
From VACS
(Difference between revisions)
(→Dimensions) |
|||
| Line 5: | Line 5: | ||
<table border="1" cellpadding="0" cellspacing="0"> | <table border="1" cellpadding="0" cellspacing="0"> | ||
<tr> | <tr> | ||
| − | <th width=" | + | <th width="30%">Name</th> |
<th width="5%">Count</th> | <th width="5%">Count</th> | ||
<th width="20%">Dimension (LxWxH)</th> | <th width="20%">Dimension (LxWxH)</th> | ||
| Line 19: | Line 19: | ||
<td>[[VACS:Projects:Hardware:LPS:RectifierBoard|Positive/Negative Power Supply Rectifier]]</td> | <td>[[VACS:Projects:Hardware:LPS:RectifierBoard|Positive/Negative Power Supply Rectifier]]</td> | ||
<td>2</td> | <td>2</td> | ||
| − | <td>123mm x 80mm x | + | <td>123mm x 80mm x 50mm</td> |
| − | <td>The height of the board is defined by the 22000uF decoupling capacitor.</td> | + | <td>The height of the board is defined by the 22000uF decoupling capacitor. The two boards are stacked together in opposite directions in such a way that the total height does not exceed 70mm.</td> |
</tr> | </tr> | ||
<tr> | <tr> | ||
| Line 46: | Line 46: | ||
<td>2</td> | <td>2</td> | ||
<td>100mm x 80mm x 35mm</td> | <td>100mm x 80mm x 35mm</td> | ||
| − | <td></td> | + | <td>These two boards are directly mounted on the heat sink.</td> |
</tr> | </tr> | ||
<tr> | <tr> | ||
| Line 52: | Line 52: | ||
<td>2</td> | <td>2</td> | ||
<td>80mm x 38mm x 15mm</td> | <td>80mm x 38mm x 15mm</td> | ||
| − | <td></td> | + | <td>The voltage regulator board is plugged (vertically) on the associated power supply output board.</td> |
</tr> | </tr> | ||
<tr> | <tr> | ||
Revision as of 22:14, 13 February 2007
This page deals with how the LPS appliance is physically arranged.
Dimensions
| Name | Count | Dimension (LxWxH) | Notes |
|---|---|---|---|
| 80VA Toric Transformer | 2 | 94mm x 37mm (Tore) | The toric transformer is heavy: 950g |
| Positive/Negative Power Supply Rectifier | 2 | 123mm x 80mm x 50mm | The height of the board is defined by the 22000uF decoupling capacitor. The two boards are stacked together in opposite directions in such a way that the total height does not exceed 70mm. |
| LPS Power supply board | 1 | 100mm x 80mm x 50mm | The height of the board is defined by the capacitors and the heat sink. |
| Positive/Negative Power Supply Controller | 2 | 100mm x 80mm x 20mm | The board must be a small height to be stacked together with the LPS master,
the total must not exceed 60mm so that the heat sink will fit in the final box. |
| LPS Master Controller | 1 | 100mm x 80mm x 20mm | |
| Positive/Negative Power Supply Outputs | 2 | 100mm x 80mm x 35mm | These two boards are directly mounted on the heat sink. |
| Positive/Negative Voltage Regulator | 2 | 80mm x 38mm x 15mm | The voltage regulator board is plugged (vertically) on the associated power supply output board. |
| Fan | 1 | 80mm x 80mm x 25mm | |
| LPS LCD Panel | 1 | 92mm x 114mm x 16mm | The display panel has a reduced height due to the buttons and LCD module. |
| ATX PC supply | 1 | 145mm x 110mm x 65mm | |
| Heat sink | 1 | 155mm x 75mm x 25mm | The heat sink has one part within the box and another external to the board. The dimension
correspond to the internal part only. |
