VACS:Projects:Hardware:LPS:Box
From VACS
Revision as of 22:09, 13 February 2007 by Stephane.Carrez (Talk | contribs)
This page deals with how the LPS appliance is physically arranged.
Dimensions
Name | Count | Dimension (LxWxH) | Notes |
---|---|---|---|
80VA Toric Transformer | 2 | 94mm x 37mm (Tore) | The toric transformer is heavy: 950g |
Positive/Negative Power Supply Rectifier | 2 | 123mm x 80mm x 60mm | The height of the board is defined by the 22000uF decoupling capacitor. |
LPS Power supply board | 1 | 100mm x 80mm x 50mm | The height of the board is defined by the capacitors and the heat sink. |
Positive/Negative Power Supply Controller | 2 | 100mm x 80mm x 20mm | The board must be a small height to be stacked together with the LPS master,
the total must not exceed 60mm so that the heat sink will fit in the final box. |
LPS Master Controller | 1 | 100mm x 80mm x 20mm | |
Positive/Negative Power Supply Outputs | 2 | 100mm x 80mm x 35mm | |
Positive/Negative Voltage Regulator | 2 | 80mm x 38mm x 15mm | |
Fan | 1 | 80mm x 80mm x 25mm | |
LPS LCD Panel | 1 | 92mm x 114mm x 16mm | The display panel has a reduced height due to the buttons and LCD module. |
ATX PC supply | 1 | 145mm x 110mm x 65mm | |
Heat sink | 1 | 155mm x 75mm x 25mm | The heat sink has one part within the box and another external to the board. The dimension
correspond to the internal part only. |