VACS:Projects:Hardware:LPS:Box
From VACS
Revision as of 22:14, 13 February 2007 by Stephane.Carrez (Talk | contribs)
This page deals with how the LPS appliance is physically arranged.
Dimensions
| Name | Count | Dimension (LxWxH) | Notes |
|---|---|---|---|
| 80VA Toric Transformer | 2 | 94mm x 37mm (Tore) | The toric transformer is heavy: 950g |
| Positive/Negative Power Supply Rectifier | 2 | 123mm x 80mm x 50mm | The height of the board is defined by the 22000uF decoupling capacitor. The two boards are stacked together in opposite directions in such a way that the total height does not exceed 70mm. |
| LPS Power supply board | 1 | 100mm x 80mm x 50mm | The height of the board is defined by the capacitors and the heat sink. |
| Positive/Negative Power Supply Controller | 2 | 100mm x 80mm x 20mm | The board must be a small height to be stacked together with the LPS master,
the total must not exceed 60mm so that the heat sink will fit in the final box. |
| LPS Master Controller | 1 | 100mm x 80mm x 20mm | |
| Positive/Negative Power Supply Outputs | 2 | 100mm x 80mm x 35mm | These two boards are directly mounted on the heat sink. |
| Positive/Negative Voltage Regulator | 2 | 80mm x 38mm x 15mm | The voltage regulator board is plugged (vertically) on the associated power supply output board. |
| Fan | 1 | 80mm x 80mm x 25mm | |
| LPS LCD Panel | 1 | 92mm x 114mm x 16mm | The display panel has a reduced height due to the buttons and LCD module. |
| ATX PC supply | 1 | 145mm x 110mm x 65mm | |
| Heat sink | 1 | 155mm x 75mm x 25mm | The heat sink has one part within the box and another external to the board. The dimension
correspond to the internal part only. |
