VACS:Projects:Hardware:LPS:PowerSupply
From VACS
(Difference between revisions)
(→LPS Power Supply Summary) |
(→LPS Power Supply Summary) |
||
Line 25: | Line 25: | ||
==LPS Power Supply Summary== | ==LPS Power Supply Summary== | ||
+ | |||
+ | |||
+ | <table width="100%" border="1" cellpadding="0" cellspacing="0"> | ||
+ | <tr> | ||
+ | <td></td> | ||
+ | <td>+24V</td> | ||
+ | <td>+9V</td> | ||
+ | <td>+5V</td> | ||
+ | <td>-5V</td> | ||
+ | <td>-24V</td> | ||
+ | </tr> | ||
+ | <tr> | ||
+ | <td>Positive Power Supply Rectifier</td> | ||
+ | <td>X</td> | ||
+ | <td></td> | ||
+ | <td></td> | ||
+ | <td>X</td> | ||
+ | <td></td> | ||
+ | </tr> | ||
+ | <tr> | ||
+ | <td>Negative Power Supply Rectifier</td> | ||
+ | <td></td> | ||
+ | <td>X</td> | ||
+ | <td></td> | ||
+ | <td></td> | ||
+ | <td>X</td> | ||
+ | </tr> | ||
+ | <tr> | ||
+ | <td>Positive Voltage Regulator</td> | ||
+ | <td>X</td> | ||
+ | <td></td> | ||
+ | <td></td> | ||
+ | <td>X</td> | ||
+ | <td></td> | ||
+ | </tr> | ||
+ | <tr> | ||
+ | <td>Negative Voltage Regulator</td> | ||
+ | <td></td> | ||
+ | <td>X</td> | ||
+ | <td></td> | ||
+ | <td></td> | ||
+ | <td>X</td> | ||
+ | </tr> | ||
+ | <tr> | ||
+ | <td>Positive Power Supply Controller</td> | ||
+ | <td></td> | ||
+ | <td>X</td> | ||
+ | <td>X</td> | ||
+ | <td>X</td> | ||
+ | <td></td> | ||
+ | </tr> | ||
+ | <tr> | ||
+ | <td>Negative Power Supply Controller</td> | ||
+ | <td></td> | ||
+ | <td>X</td> | ||
+ | <td>X</td> | ||
+ | <td>X</td> | ||
+ | <td></td> | ||
+ | </tr> | ||
+ | <tr> | ||
+ | <td>LPS Master Controller</td> | ||
+ | <td></td> | ||
+ | <td></td> | ||
+ | <td>X</td> | ||
+ | <td>X</td> | ||
+ | <td></td> | ||
+ | </tr> | ||
+ | </table> | ||
<table width="100%" border="1" cellpadding="0" cellspacing="0"> | <table width="100%" border="1" cellpadding="0" cellspacing="0"> |
Revision as of 23:45, 29 November 2006
Contents |
Description
The power supply controllers and the master power supply board need themselves a power supply. To drive the output power supply transistors a specific power supply is used, this increases the rejection of the output loads and their mutual interactions.
LPS Power Supply
Positive Power Supplies
- Positive Rectifier Board
- The positive rectifier board needs a power supply for the AOP that measure the output currents. These AOP need a +24V and a -5V supply to ensure that the output can vary between 0 and +5V (while the inputs can reach 10/15V).
- Positive Power Supply Controller
- The controller contains an ATMega8 controller, several AOP and a voltage reference. The AOPs need a +9V and -5V supplies as their outputs need only be in the 0..+5V range. The voltage reference generates a +5.000V from the +9V. The board must also drive the two relays which are in the rectifier board. The relays are driven by +5V and -5V (dV = 10V).
- Positive Voltage Regulator
- The voltage regulator drives the output power transistors using several AOPs. The AOPs must be capable of having an output in the range 0..+20V. For this they need a +24V and a -5V supply.
Negative Power Supplies
- Negative Rectifier Board
- The negative rectifier board is similar to the positive rectifier board but the AOPs need a -24V and a +9V supply. The AOPs outputs are in the 0..+5V range and the inputs may be as low as -10/-15V.
- Negative Power Supply Controller
- This is similar to the positive power supply controller.
- Negative Voltage Regulator
- The voltage regulator drives the output power transistors using several AOPs. The AOP must have the outputs that vary between 0 and -20V. They need a -24V and a +9V supply.
Master Controller
- LPS Master Controller
- The master controller contains the ATmega8 controller, drives the LCD panel, a relay and the fans. The relay and fans are connected to the +5V and -5V.
The power supply controllers and the master power supply board need themselves a power supply. A positive power supply controller uses the following supplies:
LPS Power Supply Regulation
To obtain the LPS power supplies we use the toric transformer of the positive power supply. The +24V and -24V are obtained by a voltage multiplier from the 2x9V toric transformers. In theory it can reach 36V so the decoupling capacitor is chosen to support at least 50V.
LPS Power Supply Summary
+24V | +9V | +5V | -5V | -24V | |
Positive Power Supply Rectifier | X | X | |||
Negative Power Supply Rectifier | X | X | |||
Positive Voltage Regulator | X | X | |||
Negative Voltage Regulator | X | X | |||
Positive Power Supply Controller | X | X | X | ||
Negative Power Supply Controller | X | X | X | ||
LPS Master Controller | X | X |
+24 | Positive Power Supply Rectifier | Analog | 20mA | Analog power supply for operational amplifiers. |
Positive Voltage Regulator | Analog | 50mA | ||
+9V | Negative Power Supply Rectifier | Analog | 20mA | |
Negative Voltage Regulator | Analog | 50mA | ||
Positive Power Supply Controller | Analog | 50mA | ||
Negative Power Supply Controller | Analog | 50mA | ||
+5V | Positive Power Supply Controller | Digital | 100mA | |
Negative Power Supply Controller | Digital | 100mA | ||
LPS Master Controller | Digital | 50mA | ||
LPS LCD Panel | Digital | 100mA | ||
-5V | Positive Power Supply Rectifier | Analog | 50mA | Used by the AOPs and the relays. |
Positive Power Supply Controller | Analog | 50mA | ||
Negative Power Supply Rectifier | Analog | 50mA | ||
Positive Power Supply Controller | Analog | 50mA | ||
-24V | Negative Power Supply Rectifier | Analog | 20mA | |
Negative Power Supply Regulator | Analog | 100mA |